Marel IPM portioning machine

Now for sale this great Marel portion cutter.
The machine is in excellent working order, ready for immediate production.
This particular Marel is capable of making very accurate portions from fish fillets for example.

By setting up the computer the machine will make a 3D model from the product through it’s camera and laser system. After scanning the product the machine will know exactly where to make the cuts for the desired portions.

For more specific information contact us. We’re very familiar with setting up portioning machines.


Issued US 6,164,174 when used with inweighing or feedback options
Outer Dimensions 3300 x 900 x 1500 mm , 130” x 36” x 59” (L x W x H)
Weight Approx. 1 ton
Belt Length 2484 / 5192 mm
Belt Width 280 mm
Opening 3300 x 1700 x 1600 mm, 130” x 67” x 63” (L x W x H)
Other Belt height from floor: 1000 +/- 50 mm. Possible height extensions are 450 mm, 650 mm and 850 mm
Material Steel: AISI 303 and 304
Plastic: Acetal (POM), Polyethylene (PE) and Acrylic-Plexiglas (PMMA)
Motor Type Belt motors: Interol 138E SM drum motors with pins
Knife motor: Lenze servo motor
Belt Type Perforated belt
Environmental Prot. IP65
Cleaning Manual, see instructions in hardware manual
Mounting Bolted to floor
Display M3000 Controller
Input Device M3000 Controller
Remote Control M3000 Remote Viewer
Throughput Up to 1500 kg, 3300 lb of fillets per hour (precut)
Rate 3 cuts per second on average or up to 8 cuts per second peak
Belt Speed Motor rated speed: 0.32 m/s
Range: 0.03 – 0.45 m/s
Accuracy Salmon fillets: For portions up to 120 g the accuracy is +/- 2-4 g based on 1 standard deviation. For larger portions the accuracy is +/- 1 % to 3 % of portion weight based on 1 standard deviation
Water 0 – 3 l/min, 0 – 1 gallons/min
Electrical 4 kW
Serial I/O Two serial RS-232 ports
Ethernet TCP/IP
CAN Two CAN ports
Raw Material
Suitable for Raw material: whitefish or salmon fillets, with or without skin and bones
Raw material state: fresh, smoked, water injected, wet-salted (standard solution)
Lutfisk: dry-salted, cooled down below 0°C (customized solution)
Piece Size 250 x 150 mm 10” x 6” (W x H)
Max Product length is 900mm
Voltage 3 x 380 to 3 x 480 Vac + PE
Power Consumption 4 kW
Frequency 50/60 Hz
Res. Current Breaker 300 mA